|
| |
Pallet circulating plants
Our clients make their decisions regarding the most suitable precast process based on detailed consulting. As a manufacturer of both stationary systems and state-of-the-art circulating plants, objectivity is no problem for us. Once a decision has been reached in favour of a NUSPL circulating plant, our experienced staff plans and constructs all production facilities for the precast parts and capacities to be produced. The following precast components can then be manufactured in an industrial and cost-efficient manner:
- Sandwich wall elements
- Architectural and facade elements
- Solid wall elements
- Double wall elements
- Precast slabs
- Solid floor elements
- Landing slabs
- Balcony elements
- Exposed aggregate slabs
- High-grade exposed concrete parts
- Lightweight concrete slabs
- Special components
|
|
| More Information... |
| Click on Image to view enlarged : |
|
| |
|
|
| High-performance Tilting Tables |
Top |
|
The NUSPL tilting table is an extremely solid welded construction of steel structure profiles. With several main longitudinal beams and crossbeams for the telescopic cylinders.
The diagonal crosses serve the purpose of torsional stiffness. The tilting frame is connected to the tilting trestle with tilting joints. The telescopic cylinder, the piping and the pump unit are fixed components of the table. The individual vibrator groups are controlled via a distributor box for optimal vibration during uneven element loading of the table.
Your Advantages
- Easy and safe stripping of the elements
- Concrete elements can loaded directly from the tilting table onto a truck
- Lifting or placing the elements requires only a few hook-up points with the crane
- Hydraulic tilting prevents the concrete edges from flaking and extensive subsequent repairs
- Torsional stiffness with generously dimensioned transverse cross prevents tears
- Tilting process is not distorted even if the tilting table is loaded unevenly
- Can be set up on even ground without foundations
- Homogeneous compression with high-frequency vibrators
- As an option, the tilting tables can also be coupled for lengths of 100 m and more
- First-rate exposed concrete surfaces with ground shutter surface
- The NUSPL tilting table can withstand surface loads of up to 1,000 kg/m2
- The height-adjustable edge allows for variable shutter height
- Group settings of the vibrator frequency reduce noise to a minimum
- Adjustable to all standard shuttering systems
- Concrete elements of high-quality architecture, for example, façade elements with surface coating
|
|
| More Information... |
| Click on Image to view enlarged : |
|
|
| |
|
|
|
Advantages:
- The NUSPL column formwork consists of a formwork basis with a fixed center platform and movable side platforms
- Shutter panel cantilevers (corbles) can be mounted on this at variable intervals or modular dimensions
- NUSPL shutter panel elements range in length from 1.5 to 6 m and are made of steel with special shutter materials to ensure optimal surface characteristics of the components
- The height of the shutter panel cantilevers ranges from 600 to 1,200 mm (sides and center)
- Shutter thickness: 6 - 8 mm
- They can be combined with each other in any way and also allow for the use of special shutter applications, for example, for crane cantilevers
- The height of the continuous slab formwork can be adjusted using special supports and the formwork can be quickly replaced, if needed
|
|
| More Information... |
| Click on Image to view enlarged : |
|
|
| |
|
|
| Flexible Precast Dimensions with NUSPL Beam Mould |
Top |
|
You can change the slope of gable roof beams just as variably as the height of a parallel beam - both without an overhead crane or complex hydraulics. All you need are the multiple proven rack-and-lever jacks included in the delivery for effortless use.
The design of our formwork as “climbing formwork” allows for convenient and unhindered structuring of the reinforcement, since access isn’t restricted from any side. At the same time, it has the advantage of making complete use of the bracing from its beginning to the end, because it only takes one prestressing lane to produce several beams in a row in intervals of 6 hours. Owing to the extremely low layout, the stressing wires are located in a very deep position for the bottom cord. Provided stressing abutments can be loaded with a maximum of tension, allowing for extremely long beam spans.
Summary of Advantages:
- Standard or special profiles with different height
- Choose any length
- Upper cord width variably adjustable
- Beam height variably adjustable up to 2.5 m
- No bracing of the bottom cord required
- Option of vibration and heating
- Wooden layer
- Height-adjustable side formwork
|
|
| More Information... |
| Click on Image to view enlarged : |
|
|
| |
|
|
| Stair Mould - Variostep |
Top |
|
Depending on the on-site requirements, the going can continuously vary Additional Variostep Components between 220-320mm and the rising can continuously vary between 150-200mm.
The Advantages
- Variable stairs strength
- Easy conversion between left-and right-way stairs
- Going and rising steeples adjustable
- Standard moulds up to 17 steps
- Sharp-edged stair version
- Steps formed at right angle or with undercut
- Setting System secure from concrete deposits
- Three-sided exposed concrete quality; bottom view is smooth-formed finish
- Rear wall can be horizontally moved or lifted
- Height-adjustable mould rear wall
- Mould floor made of steel
- Landing Platforms can be added on quickly and easily
- Landing Platforms can be casted with the stairs
- Horizontally moveable rear wall provides plenty of working space
- Complete adjusting tools
- Working platform
- Inserting form liners can produce anti-slip surfaces
|
|
| More Information... |
| Click on Image to view enlarged : |
|
|
| |
|
|
|
|
|
|
